abroad have long been converted to legalize the presence of standardized criteria, according to the law, so that people can justifiably play car, drove his car on the road. Unfortunately, more often, modification is still a gray area in our country. This is modified each person, and my heart a thorn.
September 1 this year, the new version of “motor vehicle inspection work regulations “(GA 801-2019) formally implemented. Gratifying is there provision for conversion part, really be relaxed. Now Xiao Bian will take you a good interpretation of what this new regulation.
playing converted should know before the old rules, driving license picture is basically the highest standards, as long as there is no match, it can be concluded that for the illegal modification. They will not speak scale of the problem, so across the board provision is obviously unreasonable. In the new regulations there, we have to see this to say:
I summarize. Roof rack, on and off the pedal, allowing modification or installation of this part should be more specific to SUV owners. “Dress Radiator cover and / or a bumper, replacement of wheels, etc.”, which relates to the owner of the more common modifications. Let’s say this radiator mask, is how to understand, Figure.
pairs, as above this change, estimates might really have illegal. Provided that! Can not be changed after changing the length and width of the vehicle, and an illumination light not affect normal operation member, can not have a portion projecting outward, the need to retain the original factory standard or trademarks, which is mandatory.
Toyota look back to this subject “Lexus”, not only changed Radiator cover, encloses the front has actually get rid of the whole, which leads to the next member, a bumper . The following example with Civic Type R.
Type R surrounded by the now is the tenth generation Civic owners darling. Under the new standard, the bumper is allowed change may refer to the FIG. But then, some of the red mandatory, must have still not be guilty. But also because the first shovel will be significantly outside the body than the sudden, it is not allowed, after that surround it?
standard in only a “bumper “this term does not distinguish between before and after, it is regarded as a general term. So we think that, both before and after can be changed. But how the definition of “bumper” does, in fact, simple to understand, is surrounded around, we often say, the absolute most of the time, will be the PP plastic, but is unlikely to be metal.
and then on to I personally value the hub part, but it is also relatively disappointing place . While the description of the hub, would not substantially described in the standard, the definition is the same as no. At first glance, that the hub can also easily change. However, the standard tire but then made a limited, in fact, also made a disguised restriction on wheels.
in a predetermined standard, tire size: the same tire size and pattern to be on the same shaft, and the tire size should be “Notice”, passing motor vehicle factory Matched content certificate and other relevant documents (or data) recorded.
Coaxial to the same pattern, i.e. the front and rear tires can be different, but must be about the same. Tire specifications must be consistent with the information, that for large wheels, still illegal. ET touches and J values, should be a little variation, of course, not large enough to affect the vehicle width, rigid requirements.
When we buy a car, will be considered late if modified, the original tire size parameters, it seems, need to think about it in advance. Then talk body change color.
[123 ] about the color change, the general description of the standard in small series and did not feel very precise, which also represents the “gray” space which will be even greater. It is proposed that, try not to use too special colors, such as shades, pearls, colorful changes and the like, too garish at best avoid, avoid formalities or unpredictable problems occur on the follow-up.
Finally, let me say that I myself have thought of, “Quxianjiuguo” is the reinforcement of the chassis, including shock absorbers, all smoky. However, I saw the following text.
line reinforcement member may, inconspicuous. However, if for a shock, the body is reduced, it is estimated or not woven ~ height is required because the original value and consistent. Paste a standard way here, I hope to be useful.
However, small series took a great effort, to the national standard, long dry flat to read the whole, the brothers find useful, a point”Looking at” and take a forward chant! So what would like to say, let’s see the comments section!
