Focus car
↓ new Trail 3D rendering exposure ↓
[ 123]
FIG imaginary Trail generation 
after the CR-V and RAV4 successive updating is completed, the Nissan Trail replacement put on the agenda. Recent foreign media have exposed a document Nissan models submitted to the Brazilian government, including a new patent Trail 3D map, source credibility is very high. According to this set of 3D map view, the appearance of the new X-Trail is more sharp, split headlights looks quite young and dynamic, the overall shape and had drawn an imaginary figure foreign media has a very high consistency.
does not use the side fastback design, straight lines can enhance the performance of space in the vehicle. Still using horizontal tail light design, but the area becomes smaller, and more flattened shape. In addition to design changes, the new generation X-Trail will be improved in terms of size. Trail length and breadth of cash were 4675/1820 / 1722mm, wheelbase 2706mm, at the same level has been considered a great advantage. The new generation of car models is expected to exceed 4.7 meters long, almost equal to the size of medium-sized SUV’s.
In addition, the new generation X-Trail will be upgraded for the power system. Cash 2.0L / 2.5L naturally aspirated engine there might be a variable compression ratio and a new three-cylinder 1.5T Mercedes GLB same section of the 1.3T four-cylinder engine replaced. At present, these two supercharged engines have entered the domestic stage, the future will be increasingly used in Nissan’s hot-selling models.
According to Japanese media “BestCarWeb” said the new generation X-Trail is expected in the 2021 world premiere, look more handsome, fully turbine of the new X-Trail Can the CR-V RAV4’s competition and win? Let us wait and see.
↓ four-cylinder Hideo return ↓
with the recent BuickAction proves one thing: ™ four-cylinder really fragrant! After three years, to promote three-cylinder engine, the Buick again this week introduced two Hideo model Edition models, priced at 119,900 and 125,900 yuan. The biggest bright spot is that the new car with a back that has been “abandoned” the 1.5L four-cylinder naturally aspirated engine, and to meet the country’s six b emissions. This old four-cylinder engine maximum horsepower of only 113, the maximum torque 141Nmiddot; m, on parameter fully behind 1.0T three-cylinder engine, but with the advantage of a natural four-cylinder, still more easily accepted by consumers.
It is understood, 1.5L four-cylinder with Hideo the 1.0T / 1.3T while sales of three-cylinder models. Although Buick China announced it was “Extended model line-up,” but the real reason I believe we all know the answer. For a three-cylinder machine Hideo sales not only cut, the terminal price is below the 40% discount, in order to restore the market, manufacturers or really understand alternative.
↓ New A4L upcoming ↓
Audi announced the sale price of mid-term facelift A4L this week, the price range of 30.80-40.00 yuan, the new car will be officially listed on April 10. As a mid-term facelift model, the new Audi A4L uses the latest family design style, more conservative style headlamps, LED daytime running lights into “eyelash” the same design style. S-line version adds silver trim, and with models will come standard with 245/35 R19 tires, high-performance specifications, further highlighting the sporty positioning.
major changes concentrated in the rear portion of the taillight, headlight shape echoes, LED light source inside the lamp vessel, while the sides of the tail light consists of a chrome foil, even more refined. Dimensions, length and breadth of the new A4L for the 4851 (4858) / 1847/1439 (1411) mm, wheelbase is 2908mm, and cash is not very different.
Interior, the new A4L overall layout change, in the control screen size from 8.8 inches to 10.1 inches lift, and the touch operation is added, so the original front Dangba the touch panel has become a more practical storage compartment.This is just where they stand in the big-screen visual perception is slightly awkward, not very refined. In addition, a car control panel used fake material of carbon fiber texture, thereby further projecting sporty.
power, the new A4L 2.0T engine will be equipped with three kinds of power. Wherein the maximum horsepower 35 TFSI models 150, peak torque 270Nmiddot; m; 40 TFSI models was 190, 320Nmiddot; m; 45 TFSI models to 252, 370Nmiddot; m. Transmission speed is still is wet double clutch gearbox 7, wherein 40 TFSI and 45 TFSI models further version provides four-wheel drive.
User: high 150 horsepower Civic has not it?
↓ domestic long axis A3L exposure ↓
In early March, Audi released a whole new generation of overseas A3 hatchback version of the model, while the sedan version of the first episode perhaps the Chinese to leave. Recently, a group of the long axis of the domestic version of the actual vehicle A3L spy was exposed users.
From the image point of view, the new A3L body side and the hatchback version there is a clear difference. New car significantly longer in the rear doors and triangular windows at the waist with a body double, cash looks more slender than the sedan version of the A3. To be sure, the rear A3L new space will certainly be much stronger than the cash A3, more in line with user needs to purchase sedan.
In addition to lengthening, A3L new generation in power will also be upgraded. Reference overseas edition model, the new domestic A3L expected to carry 1.5T, 1.5T + 48V light mix of both power systems, and may also have the 2.0T version for the Chinese market. Transmission is still a 7-speed dual-clutch gearbox, whether there will be four-wheel drive system is not known. As for the overseas edition of the three-cylinder engine 1.0T, it should not be used on domestic A3L.
↓ Jienisaisi G80 official figure ↓
into the Expo debut last year Jienisaisi G90 believe there are many students have the impressionAlthough not the introduction of domestic, but it looks indeed very memorable. This week, it’s brother G80 came. The new G80 and G90 uses the same language family, iconic large-size diamond in the net still “swallowed Heaven and Earth.” Headlight split up and down transverse distribution looked very impressive.
fastback side surface design to make it look more motion, through a belt line extends from the lamp to the tail, at the front fender two LED lights echoes with the front and rear lamps. Although its modern luxury brand, but the use of chrome rims G80’d rather American-style luxury.
G80’s interior features a center console surrounded by style, the overall tone black and brown, lots of wood and leather materials to create a strong sense of luxury. In addition, G80 further enhance the sense of technology vehicle suspension by 14.5 inches LCD knob and the shifting mechanism. I have to say, Korean luxury cars for just the right still very much in place.
G80 at a slender hood, modern it into a four-cylinder 2.5T and 3.5T V6 two turbocharged engine, the maximum horsepower and 304 respectively 380, 421 respectively, and peak torque 530Nmiddot; m. In addition, the car will offer 210 horsepower 2.2T diesel engine in markets outside the United States. The engine is matched with a modern self-developed vertical position 8AT gearbox, the drive and four-wheel drive and provides optional.
↓ or the next generation XC90 will be made ↓
Volvo parts suppliers in a recent leaked an internal information cooperation, based on the contents of leaked point of view Volvo will launch two future code-named “536US” and “536 China” new models respectively. According to the rules of the internal code name Volvo, 536 three numbers representing the large, third-generation, SUV product, means that these two new models are the third generation XC90 US version (US) and Chinese version.
combined with the news last May in Chengdu Economic and Technological Development Zone released the 3rd generation XC90 is expected to settle the Volvo factory in Chengdu, the official achieve localization.
In related news, said the next-generation Volvo XC90 will be released in 2021, introduced a new generation of models will be fully electrified technology, no longer has a pure fuel power, light and mixed hybrid plug become more popular. Price, the current version of the XC90 import price up to 63.39-83.39 million and taking into account its domestic competing products Cadillac XT6 guide price of only 41.97-54.97 million and therefore the future of the domestic version of the XC90’s price is likely to enter less than 450,000.
rims frontier
↓ introduction of charging high moral map ↓
Recently, the introduction of high moral map “charge map” service. On the high moral map App, the owner can see the individual charging pile, price, status information, quickly find the nearest, lowest price charging pile. Currently, special calls, more than Yue, Kazuma, to Wei, Xiao-Peng and other operators charging poles and electric vehicle charging companies have joined the high moral map ecology.
In addition, due to the high German is one of the Alibaba Group, and therefore high moral charge maps and Ali other services connected, vehicle owners charge can directly use the PayPal payment. This integrated approach to electric vehicle owners is a good thing, meaning they finally do not have to go in order to use various charging pile, charging and installation of a variety of APP in the cell phone.
↓ Benz rebranding common fight against SARS ↓
Following last week’s Audi and VW Logo “separation”, this week, Mercedes-Benz is also the official social accounts Logo on the replacement of propaganda against new virus outbreaks of the crown. Logo will be three new Mountain Star light becomes smaller, and separated from the circular frame, to publicize and encourage people to maintain social distance. New Logo released within 10 hours, has been the response of 140,000 Mercedes-Benz official Facebook, there are nearly 3000 comments.
is the last response indicating Benz German Chancellor Merkel, 3D printing machines will provide anti-produced MercedesPhytophthora used for 3D printing a medical respirator. Mercedes-Benz CEO even express liquidity to the German official, they will not need the German government subsidies.
↓ Lamborghini production masks 1000 / day ↓
well-known brand Lamborghini supercar this week joined the ranks of production masks. April 1, Lamborghini announced a restructuring of its production base of ultra-running part of the production plant for medical surgical masks and protective Plexiglas mask production. Among them, medical surgical masks will be borne by Lamborghini in charge of interior and custom project staff, masks daily output up to 1000; carbon fiber production plant and R & D 3D printers are used for the production of medical protective masks, output up to 200 sets.
It is reported that Lamborghini factory manufacturing medical equipment in Italy Sant’Agata middot; Bolognese, masks will be donated to the production of Bologna associated hospital to help fight pneumonia new crown epidemic.
User: BYD one day yields up 5 million masks … Lamborghini 1000 collection is every day when it?
↓ 3 countries will bid farewell to the old car? The new two-year extension of energy subsidies ↓
March 31, Chinese Premier Li Keqiang chaired a State Council executive meeting, and identified three policies to promote automobile consumption in the conference: First, it will expire at the end of subsidies for the purchase of new energy vehicles and exempt from vehicle purchase tax policy extended for 2 years. Second, the central government to take Yijiangdaibu way to support the country out of Beijing, Tianjin and other key areas and the following 3 emission standard diesel truck. Third, second-hand car distribution business tax cuts, from May 1 to the end of the year 2023, the VAT dealers from the previous 2 percentage of sales to 0.5 percentage.
Since then, Beijing has launched to encourage the scrapping of old vehicles, national 3 emission standards policy. It is reported that since 2020, ended April 1 until December 31, 2021, retirement or out of high-emission vehicles old Beijing can enjoy government subsidies, subsidies scrapped press, roll-out time is divided into two tranches, small passenger cars scrapped the maximum amount of subsidy 10,000 yuan.Recall that in 2015, Beijing also State 1, State 2 models introduced a similar policy to encourage retirement, and since February 15, 2017, Beijing began to country 1, country 2 vehicle for the implementation of the Fifth Ring Road (excluding or less) working day limit line the road, and every 4 hours to give a fine of $ 100 for violation of the provisions of the vehicle.
If this time of the year as incentives but also as a “warning”, then to 2022, Beijing, China’s third car will probably also face such situation.
↓ Shantou discovered “long” speed bump ↓
Recently, the Guangdong Shantou, a “maximum speed bump” on the Internet became popular, this whole length of about 100 meters deceleration zone located under the bridge at Shantou Jinfeng bridge, will be issued whenever a car drove through the endless “buzzing” sound. According to the project staff, he said at Jinfeng Bridge under the bridge tunnel construction work being carried out, because usually the road speed faster and more vehicles, in order to ensure the safety of construction workers and road traffic, only to set the deceleration zone.
noise tortured miserable although for safety reasons, but nearby residents was generated when the passing vehicle deceleration zone, and long speed bump also caused some security risks for the vehicle. Thus, in the “longest speed bump” built only four days after March 31, the deceleration zone was again removed. According to the site of the construction workers said, the construction side will reduce the density of speed bumps every 10 meters to retain only 2-3, the excess part of the demolition of all the current slowdown with this demolition work has been completed rectification.
car drink fun
↓ Nissan additional production old GT-R Part ↓
Classical old car enthusiasts will always face the problem of a headache – the car broke down not buy accessories. Whether used or scrap pieces deputy plant parts, we can not guarantee its quality …… but in this regard, Nissan and fans thought of together. 2017, Nissan Motor Co. launched a project called Heritage Parts Program, the project responsible for its NISMO factory, specializing in the production of older models of the new GT-R parts.
and other manufacturers produce only some of the lights, buttons and other small parts different, Nissan classic car parts in the proposed project would cover the “car travel in Japan or the indispensable periodic vehicle inspection by about 80 percentage zero component”. Therefore, many older GT-R core components, including engines, transmissions, including a new can buy original pieces today.
April 1 start, Nissan has added production GT-R (R32, R33, R34) parts, a total of 46 projects from the accessories list view, 66 models of accessories, small snaps, large bumpers, oil pump, shift fork, everything. Before if you count the parts already in production, the project has produced nearly 200 kinds of parts GTR (R32, R33, R34), which is really big for GTR car owners a good thing. Have to admit, feeling the car in Japan play environment can be good!
↓ Kyosho GT-R 50 anniversary model ↓
this week, the Japanese model introduced a brand Kyosho 1:64 GT-R 50th anniversary Edition model. The model is a combination of car model car + book sales, tax price 2750 yen, or about 175 yuan. The car kit consists of an interview with GT-R chief product specialist Hiroshi Tamura (Hiroshi TAMURA), and very worthy of fans, friends collection.
If you are willing to pay an extra money to spend 10,000 yen (about 640 yuan) will be able to buy a one-time three GT-R 50th Anniversary Commemorative Edition 1:64 alloy car models as well as an official custom acrylic display box. However, affected by the epidemic, international logistics has not been open, students may want to please the collection of local friends to buy a first-generation.
↓ Lego brand new “Don Boss” Charger ↓
In addition to Japan, Kyosho, this week, Lego has launched of a “Fast and Furious” with the Dodge Charger. This model is a mechanical group series, based on the 1970 Charger R / TModel to build from, it is the protagonist of the movie Tang boss’s car. It is composed of a whole building blocks of 1,077, vehicle length and breadth of 390/160 / 110mm. In addition to steering and damping movable, V8 engine and wheels other than the linkage, the vehicle also has a bottom bracket to lift the front wheels, the vehicle acceleration simulation movie scenes. It is reported that this Lego Dodge Charger will be held April 27, priced $ 99.99, or about 709 yuan.
this year, “Fast and Furious 9” despise, and with the money to buy a car model solution boredom of it!
The new X-Trail can kill Toyota Honda?