involves models: Ford Focus sedan with automatic transmission cars.
Symptom: reversing radar does not work or car from the warning buzzer sounding.
Countermeasure: Replace module reversing radar, radar sensors, radar sensor and radar sensor holder exterior cover. Please refer to the following steps.
FIG 1
(1) Remove right luggage compartment carpeting and plastic cover, find parking sensor module (Part No. 6M5T-15K866-AA) and remove (FIG. 1), the replacement of the improved parking sensor module (Part No. 5M5T-15K866-CC), and replace the carpet and remove the plastic cover.
FIG. 2
(2) Remove the three reversing radar sensors on the bumper (Fig. 2, Part Number is 6M5T-15K859-AA), the sensor trim cover (part number 6M5T-15B858-AA) and the sensor holder (part number 6M5T-15K861-AA). After removing the holder, the ejector outwardly trim fixed sensor (3), can be removed outside of the sensor cover.
Figure 3
Figure 4
[ 123] after (3) installed improved reversing radar sensor (part number 5M5T-15K859-BA), the sensor trim cover (part number 5M5T-15B858-AA) and the sensor holder (part number 5M5T-15K861-AA), require special attention during installation of the sensor mounting direction. Sensors need to align the exterior cover the boss recess on the sensor (FIG. 4); bumper mounted sensor, the sensor cover exterior projections and recesses on the bumper requires alignment (FIG. 5).
Figure 5
(4) After installation, inspection reversing radar function is normal.
Note: the buzzer and reversing radar lineBeam does not require replacement, two kinds of reversing radar module and radar sensors, radar sensors, and radar sensors exterior cover support module can not be mixed.
()