.
1 tubeless tire
Introduction:
tubeless tire (Tubeless Tires) the name implies, no tubeless tires is no inner tube tires.
, commonly known as tubeless tires or tubeless tires atoms, using such a tire innerliner and the tire bead inner wall to ensure good air tightness between tire and rim, tire inner tubes and play the role. No tire tube fitted within the tire itself and this tube configuration, i.e., the air filled in the tire, has been widely used, a substituted tubeless wheel.
Characteristics:
Advantages:
tubeless, preferably airtight, leak can not ensure long-term, low temperature operation of the tire, long life, simple structure, light weight, is conducive to high speed vehicles; as tire innerliner layer lining is stuck fast to the wall of the tire, the tire is not easy in the heat accumulating high speeds, when the tire is perforated, pressure does not drop drastically, can safely continue to travel some distance; because of the absence of friction between the tire and the damage caused by jamming.
Disadvantages:
way difficult to repair. Further, the size of the perforations in the adhesive layer is only when combined with small perforations on their own, slightly larger size would be difficult adhesive; when the outside temperature is too high, the self-adhesive layer may soften and flow occurs, thereby destroying the balance of the tire.
Note:
a, must maintain a predetermined pressure
tubeless tire is a high-quality rubber, good elasticity, flexibility and strong, the air pressure adapt to a wide range, even if the tire pressure is very high and no ordinary tire that stiff feeling, so the barometer use barometric pressure checks. In addition to the rolling tires, the tubeless tire deflation itself is generally not, so use barometer check inflate and maintain a predetermined pressure, as must notAs with ordinary tires to decide whether to feel qi.
Second, maintaining tire clean
tubeless tire, in use, should avoid being stabbed with sharp, hard, puncture, to avoid acid, alkali contact with contaminated oil will accelerate the decomposition of the rubber. Tires should be kept clean to prevent rubber aging, to extend the service life.
Third, should dirt road in the countryside with
tubeless tire adaptability asphalt, cement road better, even when water on road can maintain strong adhesion, having good stability. But on the soil surface, especially small muddy road adhesion, poor stability, the use of tubeless tires motorcycle is best to use in urban areas, should not be driving in the outskirts of the dirt road.
Fourth, the cold tubeless tire complement
special tire repair kit available after puncture repair, if repair repair shop does not have the conditions, cold fill yourself with cold-glue which is:
Remove the wheel 1, the tire ripped. Preferably after prying when Tire side with bamboo, both sides of the tire as far as possible to the intermediate pressure can be ripped gently, being careful not to break the edges of two tires. After
2. The foreign matter at break after cleaning, in the tire with sandpaper ambient cold break roughening coated with glue fill (may put some, but coating only once) to be 5 minutes for 7 minutes with a large cold patch attached to the tire. If the vehicle speed is high, it can make cold salty bilayer patches to improve the strength, and the same symmetrical positions glue two cold patch size in order to maintain balance in the tire wheel.
3. After tire installed, the case of an artificial pump, starts to be fierce, strive quickly filled and sealed from both sides of the tire, mounted on the valve to a predetermined stylus pressure, and then tighten the valve needle. Finally check, if not leak to install and use.