1. Reinforcement member name and function
1. Balancing lever arm lower front (original car essential accessories also called a front anti-roll bar)
is attached to the front axle and the design front wheels separately connected, the main role is responsible for controlling the inclination of the outside front wheel; see small roll.
2. The lever balance beam (original car essential accessories)
direction of the design and installation of the front sides of the front hem arm controls the overall symmetry of the front wheels. Anteversion main role is responsible for the front wheels, the ability to maintain the tracking direction of the wheel;
Overhead front suspension 3 balance lever. (Commonly known as Macau: The top bar attachments)
attached to the front design the position of the suspension tower top. The main role is to enhance the rigidity of the cabin and the front portion of the vehicle body, the frame offset transverse torsion deformation caused by centrifugation (at the time of deformation can cause serious overhead tear), to improve the cornering ability of the vehicle to improve the cornering speed, the vehicle body is reduced by the roll angle of the centrifugal force produced;
4 before the end of the balance beam lever. (commonly known as: front bottom bar attachments)
designed and installed in front of the front axle and the frame portion is connected to the chassis. The main role is to enhance the connection strength of the front cross member bottom (front axle) to the chassis, reducing the displacement of the front axle of the vehicle body deformation distortion caused by the centrifugal force, and its main role is to improve the cornering performance of the same;
rear suspension tower 5. tower bar (commonly known as: the top bar attachments)
is attached to the design position of the top of the rear suspension tower. The main role is to enhance the strength of the boot, the rear compartment is reduced due to lateral distortion caused by the centrifugal force, reducing the roll of the rear of the vehicle when cornering, to improve cornering performance of the vehicle;.
6 rear axle suspension enhanced balance rod (commonly known as: the bottom bar attachments.)
is attached to the connector design position behind the rear axle and the chassis frame. The main role is to enhance the coupling degree of the rear axle and the frame;.
7 frame (vehicle body) of the chassis reinforcing balance lever (assembly)
is attached to the middle portion designed chassis frame, the main role is to strengthen the frame of the chassis the overall rigidity.
