Clutch release bearing on the vehicle is a more important part, which is mounted between the clutch and the transmission, separate loose bearing seat on the tubular extension of the bearing cap to the first shaft of the transmission, by a return spring to release bearing always release fork against the shoulder, and finally retreat position, and the lever end separation (separation means) to maintain a gap of about 3 ~ 4mm. Since the clutch pressure plate, separated from the engine crankshaft synchronous operation lever, and the release fork can move axially along the output shaft of the clutch, the direct use of the release fork to dial the release lever is clearly not possible by the separation of the lever while rotating a release bearing edge axially moving clutch output shaft, thereby ensuring smooth clutch engageable isolated softer and reduce wear, so that the life of the drive train and the clutch is extended.
1. Faulty clutch release bearing
1) high operating temperature of overheat
2) lack of lubrication and wear
3) free travel is too small or too many times by the carrier
4) adjusted to the separation lever is flat
5) a return spring release bearing is good
2. Note
1) Light step, easy, smooth engagement and disengagement of it.
2) pay attention to maintenance, periodically or at the time of the annual vet maintenance, make butter soaked with cooking method, so that there is sufficient lubricant.
3) in accordance with a predetermined operation, to avoid the occurrence half-engaged clutch half disengaged state, to reduce the frequency of use of the clutch.
4) adjusting the free travel, it meets the requirements (30-40mm), preventing the free stroke is too large or too small.
5) Note leveling clutch release lever, the spring force of the return spring to ensure compliance.
6) engaged to minimize separation times, reducing the impact load.
clutch release bearing is an important part of the car, which requires car owners in the usual routine maintenance should pay more attention to maintenance and testing clutch release bearings, if unusual to find professionals to promptly solve Of course, if the problem is small, they can handle their own hands.