Skip to content

What is maintenance balancing?

1

What is?

generally means that the car is balanced balancing mass on the tire axial direction, is commonly referred to retrofit counterweight.

cars at the factory, has made balancing the tire. But in use, the balance may be damaged. When replacing the tires, it should be balanced. Balancing the wheel, shall be performed on a special balancing machine.

2

how to operate?

dynamic balance requires four steps: First, the LOGO removed, the wheels mounted on the balancing instrument, adapt the size of the selected fixture. First ruler pull out the balancing instrument, measurements, and enter the first controller.

The second step is then to bend out ruler measuring rim width, same in the second controller input.

The third step is the controller input wheel rim diameter, according STRAR, begins.

When the detection is stopped, the computer will measure the outer rim of the need to increase the weight of the weights, the outer first load, the rotation of the tire, according to the prompts on the weight beat.

for only a single balancing tires, their purpose is to make the center of gravity of the tire rotation does not occur when the deflection. As long as the removed tire balancing, the balancing machine, turn about, to see the values ​​indicated by the device.

simultaneously with the knock value corresponding sides of the hub of the wheel balance weight of the block (a block buckle small tin, well above the standard weight), it is to be noted that, for example about 10, 15 are shown, it They should also knock on both the left and right, respectively, balance weight 15 and the weight 10, andNot just a knock balancer weight 5 on the right, that fail to meet requirements.

should be done regularly tire balancing inspection, the inspection balancing detector. Tire balance is divided into static and dynamic balance balance two kinds. Dynamic wheel imbalance will swing, so tire wear is generated wavy; static imbalance will produce bumps and chattering, often produce flat tire spot phenomenon. Therefore, regular testing can not only extend tire life balance, but also improve the stability of cars, avoid tire swing at high speed, beat traffic accidents caused by loss of control.

3

What are the benefits?

1, enhance the driving comfort

2, to reduce fuel consumption

3, increased tire life

4, to ensure straight running stability of the vehicle

5, reducing wear parts chassis suspension

6, with enhanced safety

4 [ 123]

when to do it?

1, tire replacement or repair after a collision

2, unilateral partial front and rear tire wear

3, the steering wheel while driving too heavy floating or shaking

4, when the car straight to the left or right deviation

5, although no more conditions, but for maintenance purposes, it is recommended to drive the new car after three months later six months or ten thousand kilometers a

Leave a Reply

Your email address will not be published. Required fields are marked *