Skip to content

What is maintenance running?

1

What is?

refers to the mechanical components in contact with ships running in the initial operation, the friction engagement process.

2

role

is also called break-away together. Car break-in period refers to the period after the early exit of a new car or repair, typically 1000 to 1500 km, which is to ensure full access to mechanical friction, adaptation, basic mileage stereotypes. During this period may be adjusted to enhance the ability of the car to adapt to the various components of the environment, and the projections on the worn parts. The pros and cons of running the car, will have a major impact on the life, safety, economy cars.

3

process

vehicles running mileage of 1000-2500 km run-in period of imported cars the longer, the majority of 1500-3000 km. Run-in period is divided into three stages. For the initial run-in, 200 kilometers run-degree early 3000 kilometers oxide film formed when running mileage to 100 km, to get the car into the best condition.

4

Did you know?

In the run-in period should pay attention to the following points

Maintain a smooth start, avoid the pedal to the metal, and does not make the engine speed is too high.

* before start, the water temperature should reach above 50 ℃. Starting at a low speed, 1 km after the shift into high gear

· Driving water temperature should be controlled at 80 ℃ -90 ℃.

· traveling timely shifting, a gear not prolonged use, can not use low speed upshift or downshift at high speed.

select * good road, to avoid excessive vibration, collision or emergency braking. Front brake, clutch should be separated.

· made of high quality fuel and oil, not to use engine anti-wear additives. To avoid sudden braking during

· car running.

Leave a Reply

Your email address will not be published. Required fields are marked *