Sport appearance package refers to a rope through the installation of an external device and a flow splitting device, to improve the aerodynamics of the vehicle, reducing the air resistance, so as to achieve a more complete set of assembly motion driving experience, including a siege, surrounded by the chassis, rack, tail and so on. The following brief siege.
1, surrounded by large —- (automobile body external spoilers). The main role is: to reduce the reverse flow produced cars, while increasing the pressure of the car. More stable when the car in motion, thereby reducing fuel consumption. The most prominent appearance of personalized accessories.
2, surrounded by large pumps basically divided into the two categories section and the lip section, wherein the pump is surrounded class models the original to remove the entire front and rear bars, and then loaded on to another pump. Such surround easier installation, can change the look of a large degree of convergence, more personalized. The class is surrounded by the lip section is plus half of the lower lip on the original bumper, surrounded by the quality of this section and installation of high technical requirements. Because surround and bumper of adaptation can not exceed 1.5MM, otherwise it will affect the appearance and high speed when there will be the danger of falling off. Some of converted stores surrounded by some installation Uneven quality, adaptation is very poor, and then slit to repair putty with screw fastening call above, and finally baking oil. Such extremely professional practice, since most of the original car bumpers are made of plastic with a PU, such a strong flexible material, and surrounds the higher hardness is made of resin, toughness is poor. So, after a period of time attached to the car with the inevitable cracks that position, if you want it removed, is simply asking for trouble.
3, how to choose suitable for his car surrounded by large:
(1) engine head: light weight, high strength, and can withstand high temperatures. Best able to take away the heat engine.
(2) Lip: Lip shape is the most prominent personality AERO PARTS, also mounted is the largest owner! If the shape is not substantially form a sharp shape, there is a fixed code Aberdeen tightening (not straps), can be installed, but should not be selected when selecting the style number is too low; otherwise, the daily Bank Street also bring their own inconvenient.
(3) the pump before the spoiler: At present, the popular canard can be regarded as a point towards the front a plurality DOWN FORCE most effective AERO PARTS, installed in a growing number of people. However, the choice of the installation, to avoid too sharp convex shape and style. Otherwise easily constitute passers hurt.
(4) GT-WING, the gap from the main body of the wing and in the following 2CM, if it exceeds this figure, both ends of the length of the main wing and the door fender to be reserved 16.5CM (each side).
(5) skirt: vehicle height and the rear surface of not less than 9CM installed surround (height about a pack of cigarettes) from the lowest. Catalyzes the shield from the ground not less than 5CM. Therefore, we should pay more attention!
4, to select a material with distinction. Domestic material surrounded by large suite mainly:
(1) (ABS plastic) such a vacuum forming molded product is so thin, the general toughness.
(2) (PU plastic) such products as it is injection molded at a low temperature, has high flexibility and strength, while the vehicle body is also optimum osculation, and ordered to too long. It is the best one among the three materials, but the high cost of such products, the average consumer is difficult to accept.
(3) (resin fiber material), this kind of product cheaper, more styles, so become the first choice for many owners. To purchase the product to the attention of the following points: ① better toughness, the ability of torsion; ② heat distortion; ③ the surface to be smooth, lighter weight; ④ body density higher degree; so you You can choose to surround their desirable!