.
The basic design requirements of a shaft
The basic design requirements of automotive transmission:
1) ensure that the relative position of the two shafts are connected in the expected range of variation can be reliably transmitted power.
2) ensure that the two shafts are connected as a constant velocity operation. Since the additional load generated by the gimbal angle, vibration and noise to be within the allowable range. H
3) transmission efficiency, long life, simple structure, easy manufacturing, and easy maintenance and so on.
In order to ensure the normal operation of the drive shaft, extending its life, to be noted that, in use: the car started by a high speed gear is prohibited; non Meng lift the clutch pedal; non-automotive overloading, speeding; should always check the drive shaft working conditions; should always check the tightness of the hanger shaft, the supporting rubber is damaged, whether all joints Songkuang shaft, the drive shaft is deformed; in order to ensure balancing of the drive shaft, a balance should always pay attention to whether the sealing off lug . The new support provided by a drive shaft assembly, the loading should be noted that the telescopic shaft assembly new marker sleeves should ensure a flange yoke in a plane.