Many riders are often heard saying: xx a car burning oil, burning oil in the end is how is it? How to determine burning oil? Today’ll tell you on that point.
speak today at automobile oil consumption is too large, it is commonly known as burning oil.
normal vehicle, the amount of oil loss of a standard, simple summarize is:
with about 1000 km 0.2L or less; if it exceeds this digital, in theory, can be defined as the burning oil.
Simple external oil consumption can be divided into three points:
1, natural rubber seal or aging, permeability, oil;
[123 ] 2, turbocharged
3, a crankcase ventilation
Usually these three visible without. Crankcase ventilation naked eye can not see, but in general it is a problem, there will be some fault performance vehicles, such as leaks or drain is clogged.
inside the oil consumption mainly for mechanical parts, such as valve seals aging, such as when a valve in the down stroke of the valve guide Songkuang, resulting in a greater amount of waste valve, the valve will seal premature wear. Otherwise, the natural aging takes a long time.
Internal consumption as well as a piston ring, mainly for oil ring, such as wear and the gap of the oil ring.
during the car , found that failure alert lamp is lit, smoke exhaust pipe or not, or an abnormal open up a whole car, examination found to reduce the oil, even very consumption big time, the car is already a little bit damaged.
Machine lamp flashes : There are two possibilities, the system detects the lubricating oil pressure of the standard, indicating the amount of oil in the critical state; or reduced performance of the oil pump