M3 CS is coming, the power is beyond imagination, is the BMW want to take a lesson for AMG?

Although the latest BMW M3 Competition was just officially published in September 2020, it was published at Taiwan at the end of April 2021, but according to foreign media BMW Blog, BMW has begun to start the development of the vehicle performance flagship CS version, Although it is still not determined to issue a time course, it can be determined that a large number of carbon fiber components will be used as the configuration of all CS cars, and the engine output will be lifted.

According to the past experience, the CS (Competition Sport) can become a car system performance. In addition to the engine output maximization, the most important thing is to light weight and Chassis strengthening. Foreign media estimates that M3 CS will be more than 10 to 20 horsepower than the Competition version; in a lightweight part, since the current M3 Competition has been configured with carbon fiber car, it is expected that M3 CS will be The hood is changed to carbon fibers and replacing more carbon fiber kits to further reduce the vehicle weight. The rest include brakes, suspensions, differentials, and even inner parts such as seats, center consolidation stations, etc., can be expected to obtain considerable degree of improvement.

The new generation M3 published in 2020, there are currently two versions. The general version also uses a 3.0-liter Tremella 6-cylinder M twin Power twin turbine engine. The general version has 480 horsepower, and the maximum output of Competition version of competition is increased to 510, 650N.m. In terms of driving, only the M XDrive four-drive system-free M xDrive four-drive system-based M xDrive four-drive system for consumers, and the remaining rear wheel drive configuration, so if the foreign media is estimated, M3 cs will have 520 to 530. Maximum horsepower.

Further, the most curious thing is whether the CS model will use four-wheel drive configuration, orLightweight, but continuing the setting of traditional backward drives? As far as foreign media is concerned, although it is still too early, BMW is likely to use four-wheel drive configuration to ensure the movement of the vehicle.

Unfortunately, this foreign media did not further reveal whether BMW was also developed by M4 CS, follow-up to continue to track, and brought the first hand.