In the course of the car, some car trouble, we can be our own hands to deal with, today small cars finishing the reasons nine glitches and solutions!
1, glass lifts abnormal noise
ordinary utility vehicle about a year or two, there will be a glass lift abnormal sound case appear. Such slits are generally issued abnormal noise or friction noise sound dirty foreign substance between the glass and the rubber seal. In such case, at the time of washing, rinsing toward the gap between the window and the sealing strip with water cannons. Once dry down vehicle window, wrapped with a wet cloth or hard chopsticks card insertion slot repeatedly wipe the glass clip strips.
2, replace the wiper
As a wiper consumption parts, there is no clear replacement time, but according to the case of a conventional car look, a couple of years definitely needs to be replaced. Replacing the wipers currently available in the market are not uniform, but more similar installation in the form of most of the models, the central location of a clip, after pressing down gently slap wipers naturally fall off, the operation is very simple. The same is true of the installation method, the slot aligned with each other, pull out a can, and interested friends may wish to look for opportunities for yourself.
3, the height of the lights is not the same
There are many models are equipped with height adjustable headlights function, but when when the lights appear one high and one low this function will not work anymore. Then open the hood, in position around the headlamps have a corresponding adjustment screw, tools need to be prepared for the Allen wrench, as close to the front wall, and marked at the point of the bulb to the horizontal direction, and then car backwards three meters in the process of adjusting the height, the height of the irradiation lights do before the height mark, 10 cm gap on it.
4, air conditioning, cleaning and disinfection
generally go 4S store or outside of the cosmetic repair station, to make a conditioning cleaning and disinfection of words, also you need a lot of money, in fact, can solve yourself. First air conditioning filter outCome, then ended up outside the air-conditioning cycle, not cooling, transfer the largest amount of wind, and then locate the air conditioning inside air inlet spray foam on it.
5, replace the air filter
located in the engine compartment of the air cleaner, general cleaning of the replacement period between 10,000 and 30,000 km range. Outside air filter has a housing cover, sealed in the housing cover several snap four weeks, to keep the intake passage. Snap relatively simple structure, the outer pull the plastic housing can snap open, open to see the air cleaner. After the removal of the old air filter, filter holder beneath the site will be a lot of dust, we can remove dust with high pressure air gun, then go back and install the new air filter.
6, replace the air filter
most models of air-conditioning filter replacement interval of 1 year, of course, different car environment the vehicle needs to be adjusted according to their own situation. Apart from a few models due to the installation position outside their own replacement difficulties, many models have air conditioning filter can be replaced on their own, ordinary vehicles are air conditioning filter (uncertain about) beneath the center console. Replacement not too much trouble, nothing more than open the shell to remove and replace a new filter, air filter due to the different position of each car, and different disassembly methods, should be noted that some vehicles demolition process to follow fixed order or need some tools and techniques.
7, their fill paint
car run more, inevitable bumps, especially paint Total there will be a variety of small scratches. Because this issue went to a trip to the 4S shop, it is a storm in a teacup. If only some small parts of the paint chips or small scratches, may wish to own automotive supplies market buy materials to try mended. Material preparation is also very simple: a vial or alcohol foam cleaner, 3M paper yarn thickness, a fine brush, a pen or a primary color original paint with the paint color similar soft wax and hard wax. Note the scratched-up paint before the place clean and polished smooth before painting. Once the paint is dry, then wet polished, then clean the wax can be.
9, cold abnormal shakingWhen the movable
Cold start is a lot of jitter problems common gasoline engine vehicle. Its main reason is not complete combustion in the cylinder, resulting in insufficient power vehicle, the vehicle took place jitter. If an individual cylinder working because of a bad result in the valve closed lax, can stop the high-speed gear 3 or 4 or more in a short run, the symptoms can disappear. If the heat does not shake the car, but the shift is not suitable, there may be an uneven amount of fuel injection nozzle is necessary to detect the cleaning, it would need to process a professional service facility.
