can not Headlight Brightener brightening but a power source line, the original headlights pick out from the generator into a line connected from the battery power, so we can guarantee the stability of the headlight luminance. brightener is made of two relays.
1. Headlight brightener Principle
is to use the original Headlight Brightener vehicle headlight switch group formed of coil windings Zengliang headlight relay is controlled such that the opening and closing of the relay contacts. When the headlight switch is open, the relay winding Zengliang headlights are current, magnetic field generated by the coil magnetic core thereby pull the contacts, and then from the battery + terminal of the current flowing through the movable contact contacts the fixed contact headlamp bulb through the return line to the battery – terminal.
2. Zengliang disadvantages headlamps
the lamp power increases, which also represents the amount used is increased, after which the current increases, the line may play heat, thermal resistance increases from the line, after the three kinds of resistance increases may be:
1. Since the line resistance increases to cause the current through the lamp does not light
2. the line from the large amount of heat, resulting in a natural line.
3. When lamp power is increased, which will increase the self-heating, resulting in the original car yellow lamp aging.
3. Headlight brightener Brand
1, super white lamp, best choice 60 / 65W, the brightener first installed, adjusted irradiation angle, good luminance , but also save electricity. But the problem is not easy to find common type of ultra-white lamp 60 / 65W of.
2, is now available in the market there is a super white, power 90 / 100W, but the special factory-designed nearly 150W power emit light. Also suitable resins mirror.
3, the installation of Philips # 39; Blue Jeans # 39 ;, the effect is very good, but the problem is all the weeks too expensive.
Functions and Features
1) improved brightness headlamps, oldThe vehicle light 30 can be increased percentage return to the original brightness of a new car.
2) protected the original car lines, electrical lines and the original car member does not occur due to excessive current, damage and erosion. Especially for vehicle use 100 watt bulbs have a good protection.
3) easy installation, without changes to the original car assembly line can be used directly.
4) After the product inspection vehicle headlight luminance can be reached.
5) practical, wide versatility, can be fitted to any vehicle.
6) of the vehicle itself does not generate any side effects.
4. The method of assembling and precautions
1, prior to assembly of the vehicle to identify the first operating voltage (12V or 24V), and then connected to line connection assembly according to the table, will certainly be Brighter not work and electrical parts were destroyed phenomenon.
2, brightening power supply directly to the positive battery red, and then connect the two lamp sockets, one end brightener original socket (the other end of the float) to complete the wiring.
3, 4 lamp assembly manufactured by series models, all headlamps equipped with 60-watt lamp in an brightener should line 2 into the lamp system, or due to excessive current overload the generator and cause brightening is the line to be burned, there will be some loss of battery electric vehicle phenomenon.
4, which does not affect the life of the lamp brightening. Such as quality problems, caused by the following conditions: ① the original car light bulbs have been used to limit the generator voltage is too high ② ③ poor quality bulbs, it is recommendedUse a regular light bulb factory good brand.
5, and electrical lines scuffed by aging resistance, electrical conductivity decreased due to the headlamps can not achieve the desired luminance.
6, since the original car lines into account the needs of the overall structure, is bound to make the line too long production, too the contact point, through strong lines, so that the line leading to the power supply voltage have a great decrease, and thus, the headlight can not achieve the desired brightness.
7, the power converter 100 watt light bulb original car lines and an electrical device due to excessive current ablation and cause varying degrees of damage, wear and accelerated aging and shorten the service life. While causing light levels gradually weakened.
8, the installation of relays are generally carried out on the original car line modification, this is not standardized, very troublesome, and destroy the original car lines, to the security of electricity a great deal of risk, and to repair work to bring a lot of inconvenience. Malignant traffic accidents have occurred due to the installation of relay caused.