.
1 Hinges Hinge Category
There is currently seen on the market hinge summarized as follows:
1, by the base types into detachable and fixed units;
[123 ] 2, according to the type of the arm body is divided into: two kinds of slide-in card and;
3, divided by a hinge style stages of development: some force hinges, Sec force hinge, hydraulic buffering hinge ;
4, according to the open angle of the hinge point: 95-110 degrees commonly used, special 45 degrees, 135 degrees, 175 degrees and the like;
5, by covering position and the door panel divided into full cover (straight curved, straight arm) PCT generally cover 18, the cover half (in turn, crank) PCT cover 9, containing (greater curvature, Okuma) all hidden inside the door;
6 , according to the type of hinge is divided into: an ordinary, Sec force hinge, short arm hinge 26 cup miniature hinges, pin hinges, aluminum frame door hinge, special angle hinge, a glass hinge, the rebound of the hinge, American hinge, damping hinges Wait.
7. The use divided into the following four properties:
(1) General hinge
Hinge, from the material can be divided into: iron, copper quality, stainless steel quality. From the specifications can be divided into: 2 “(50mm), 2.5” (65mm), 3 “(75mm), 4” (100mm), 5 “(125mm), 6” (150mm), 5065mm hinge suitable for cabinets, wardrobe doors, 75mm is suitable for windows, screen door, 100150mm apply to the door of the wooden doors, aluminum doors.
The disadvantage of ordinary hinge having no function of the spring hinge, the hinge must be installed and then loaded on a variety of touch beads, otherwise the wind will blow the door. Another special hinge detachable hinge, flag hinge, H and the like which may be detachable hinges mounted doors according to special needs, it is convenient, is limited by the use of direction,Minutes left type and right type.
(2) a spring hinge
is mainly used for cabinet doors, closet doors, which generally requires a plate thickness of 1820mm. From the material can be divided into: galvanized iron, zinc alloy. Points from the performance, can be divided into: the need holes, no holes two kinds. Without holes it is what we call the bridge hinge. Bridge appears to hinge like a bridge, so called bridge hinge. It is characterized not need to drill holes in the door, but without style restrictions. Specifications are: small, medium, large.
for an holes, it is currently used in the cabinet door spring hinge like. It features: door must be holes, door hinge style by the restrictions will not close the door was blown open, no need to install a variety of touch spiders. Specifications are: amp; 26, amp; 35. There may be detachable and non-directional hinge non-detachable directional hinge points. The 303 Series Long-liter hinge is detachable directional hinge, and the 204 series is not detachable spring hinge separable from the shape: full cover (or straight arm, straight bend) semi-cover (or crank, in bend) inside (or Okuma, the greater curvature) with a hinge adjustment screw up and down, left and right adjustment plate height, thickness, holes that two screw holes from the surface is generally 32mm, diameter and side plate sides distance of 4mm (drawing).
In addition, spring hinges and various special specifications, such as: the inside of the hinge angle of 45 degrees, 135 degrees outside the hinge, the hinge opening angle of 175 degrees.
On the right angle (straight arm), semi-curved (half song), the difference between Big Bend (Okuma) three hinges: straight hinge allows the door completely blocking plate; semi-curved hinge allows cover plate door portion; the greater curvature and the hinge allows the door parallel to the side panels.
(3) large door hinge
it points common type and bearing type, ordinary type already mentioned above, now highlight some of the bearing type. Bearing type from the material can be divided into copper, stainless steel quality. Points from the specification: 100X75 125X75 150X90 100X100 125X100 150X100 with a thickness of 2.5mm, 3mm bearing has two bearings, four bearings. Consumption from the current situation, the choice of copper bearing hinges more, because of its styling, beautiful, affordable, and equipped with a screw.
(4) other hinge
There table hinge, turning door hinge, a glass hinge. A hinge for mounting on a glass frameless glass cabinet doors, the glass having a thickness of not more than required 56mm. Shape have holes, having all the properties of a spring hinge. No holes for the upper and lower magnetic-type top loading type, such as Pepsi, magnetic glass hinges.
hinge has an important position in the hardware, the quality is good or bad hinge directly related to furniture, doors and windows usage.