1. When the parking brake is a method
the parking brake, the brake pedal down Tazhu up the parking brake lever is fully withdrawn. To release the parking brake, the brake pedal Tazhu down, the parking brake lever upward slightly pulled button on the handle end of the thumb press, the parking brake lever is then lowered to the original position. The car is equipped with an automatic transmission, it must first apply the parking brake, then move the gear lever to the “P” (parking) position. Parking in the sloping ground, if the first shift to “P” position before the parking brake, the weight of your body will be difficult upshift from the “P” (parking) when preparing to move their cars.
In preparation for start car, the shift lever from the first to be “P” (parking) range change out before releasing the parking brake. Not tighten the parking brake when the car start, otherwise they will overheat the brakes after declining role, brake shortened life or cause permanent damage to the brakes.
If the parking brake is not stable braking car, or can not fully released, you should immediately ask the dealer or service station for examination. Before leaving the car, usually all should apply the parking brake, otherwise the car will move, causing injury or damage. When parking, the shift lever to ensure that the manual transmission is in neutral car: automotive automatic transmission shift lever is in the “P” (parking) position or the “N” (neutral) position, and most of the automatic transmission automobile car ignition key can only be removed when the P range. As no special circumstances, strictly prohibited automotive transmission in the parking behavior forward gear (D, S, L, or with Arabic numerals, etc.) or reverse (R) position.